Skip to main content

Algorithm: Board and Movement

This page describes in detail how the Gift Tracking Board works: what positions it consists of, how you move from Giver to Recipient, how the Board splits and how the Recipient is selected. We recommend studying this carefully — it is the foundation of the entire algorithm.

Board Structure

The Gift Tracking Board is a digital system that records the order of sending and receiving gifts. Each Board consists of 15 positions and is divided into two sides — left and right.

Role Positions On each side Location
Recipient 1 In the center of the Board. One for the entire Board.
Creator 2 1 One on each side.
Builder 4 2 Two on each side.
Giver 8 4 Four on each side.

my_board.png

ℹ️ Movement goes toward the center

You enter the Board as a Giver (bottom position) and advance toward the center — the Recipient position. The more active the members on your side of the Board — the faster you advance.

Member Roles

There are four roles on the Board. Each is a stage of your journey to the Recipient position.

1 Giver — starting position
You send a gift to the member in the Recipient position.
After sending, invite new members — this speeds up the Board filling.
2 Builder — intermediate position
Invite members to fulfill your qualification.
You will need it when you become a Creator and Recipient.
3 Creator — pre-final position
At the next split, you become the Recipient of a new Board.
You are directly interested in filling the Board.
4 Recipient — final position
You receive up to 8 gifts from all Givers.
Continue inviting — this strengthens your qualification at the next levels.
💡 Important principle

The speed of Board filling depends on you and other members.
At any position, you don't need to passively wait for others. Invite new people, help partners understand the algorithm — and your side of the Board will fill faster.
💡 Example: Anna's journey on the Starter Board

Anna enters the Starter Board and sends a gift of 10 USDT — she is a Giver.

Her side of the Board fills (4 Givers sent gifts) — the first split occurs. Anna becomes a Builder. She invites two friends to the Starter Board — this is her future qualification.

Another filling of the side — Anna is now a Creator.
At the next split, she will take the Recipient position.

Third filling — Anna became a Recipient and begins receiving gifts from new Givers. In total, she can receive up to 8 gifts. (The eighth gift is reserved for reactivating the same Board again)

Movement on the Board

Your advancement on the Board occurs through the mechanism of side splittingsplit. mechanism.

Each time all 4 Givers on your side have sent gifts — a split occurs, and you move up one position.

You enter the Board inat the Giver position and send a gift.
First side filling — you move to the Builder position.
Second filling — you are now inat the Creator position.
Third filling — you have reached the Recipient position and receive up to 8 gifts.

Снимок экрана 2569-02-05 в 12.27.05.png

The classic path takes three filling cycles.

However, many members complete this path faster — in two cycles or even one.
This is possible thanks to the "Overtake" strategy.

💡 Example: how many splits to wait for

BorisRobert entered the Starter Board.
On his side there are 4 positionsplaces for Givers.
When all 4 are filled and send gifts — a split will occur.

If BorisRobert and his team actively invite members, splits can happen withinin a few days. If members are passive — filling the side may take longer.

Key point: BorisRobert doesn't have to wait.
He can invite his acquaintances to fill his side of the Board faster.

Board Split

A split is an automatic stage that occurs separately for each side of the Board.

ℹ️ Split condition

Four Givers on one side have taken all positions,places, and all four gifts have been successfully sent to the Recipient.

What happens during a classic split:

Creator becomes the Recipient of a new Board.
Builders become Creators.
Givers become Builders.
8 new positionsplaces for Givers open.

Снимок экрана 2569-02-05 в 12.29.03.png

💡 Please note

The left and right sides of the Board split independently of each other and canmay complete cyclesthe cycle at different times.
💡 Example: left side split

On the left side of the Board:
• Creator — VictorJames
• Builders — GalinaJessica and DmitryMichael
• 4 Givers sent all gifts

A split occurs:
VictorJames (was Creator) → becomes Recipient on a new Board
GalinaJessica and DmitryMichael (were Builders) → become Creators
• All 4 Givers → become Builders
• 8 new positionsplaces for Givers open

Meanwhile, the right side of the Board may be only half filled — it will split later when its 4 Givers also send gifts.

"Overtake" Strategy

"Overtake" is a situation when a member receives the Recipient position earlier than someone above them. This happens automatically when the higher-rankedranking member did not passfails the algorithm check.

At each split, the algorithm checks candidates for the Recipient position by three criteria:

1 Activity
The member is not in "Sleeping" status. Global and Current activity apply.
2 No blocks
No temporary or permanent account blocks.
3 Qualification
Qualification counter is greater than zero (more details on the "Rules and Mechanics" page).
💡 Example: Overtake on the Starter Board

On the left side of the Board:
• Creator — ElenaEmily (but she hasn't logged into the bot for 3 days — "Sleeping" status)
• Builders — ZhannaSarah and ZakharDavid

The left side is filled, a split occurs. The algorithm checks Elena:Emily:
• Activity — ❌ ("Sleeping" status)

ElenaEmily did not passfailed the check. The algorithm moves to the Builders. ZhannaSarah is active, no blocks, has qualification — ✅. ZhannaSarah overtakes ElenaEmily and becomes Recipient.

ElenaEmily remains on the Board — but now inat the Creator position on a new Board. When she restores activity, she can become Recipient at the next split.

Recipient Selection Algorithm

When a Board side splits, the algorithm determines who will take the Recipient position. The check goes sequentially — from senior positions to junior.

ℹ️ Stage 1 — Creator Check

The Creator is considered first. The bot checks them by three criteria: activity, no blocks, qualification present.qualification. If all three checks pass — the Creator becomes Recipient.
💡 Stage 2 — Overtake: BuildersBuilder check

If the Creator did not passfailed the check, the algorithm moves to the two Builders. Possible outcomes:

One passed, the other didn't — the one who passed becomes Recipient, the one who didn't becomes Creator on thea new Board.
Both passed the Priority Algorithm activates (described below).
Neither passed — move to Stage 3.
⚠️ Stage 3 — Overtake: GiversGiver check

If neither the Creator nor the Builders passed the check — the algorithm checks all four Givers by the same criteria.

One passed — they become Recipient.
Several passed the Priority Algorithm activates.

Special case: if two or more active Givers have no invited members — the Recipient becomes the one who registered later. The others had more time to form a team.
💡 Example: three-stage check on one Board

The left side is filled, a split occurs. The algorithm begins checking:

Stage 1. Creator — Igor.John. Check: activity ✅, blocks ✅, qualification ❌ (0 invited on this Board). IgorJohn did not pass.failed.

Stage 2. Builders — KiraEmma and Lev.Robert. Kira:Emma: activity ✅, blocks ✅, qualification ✅. Lev:Robert: activity ❌ ("Sleeping" status).

Result: KiraEmma overtakes both IgorJohn and LevRobert — becomes Recipient. IgorJohn and LevRobert remain on new Boards at lower positions.
💡 Example: Giver Overtake by a Giver (Stage 3)

Creator — in "Sleeping" status. Both Builders are blocked (previously left Boards).

The algorithm moves to Stage 3 — GiversGiver check. Of the four Givers, two are active with qualification. The Priority Algorithm activates — and the Recipient becomes the one who invited more members to this Board.

Thus a Giver can overtake three levels at once (Builder, Creator) and become Recipient in one split.

Priority Algorithm

When two or more members simultaneously claim the Recipient position, the bot determines priority automatically by three criteria — sequentially:

1 Personal partners on this Board
The number of personally invited partners on the current level Board is compared. Priority goes to the one who invited more.
2 Depth of participation
If the first criterion is equal — the bot looks at previous Boards, from the current down to Starter. Priority goes to the one with more partners on lower Boards.
3 Registration time
If the number of partners on all Boards is the same — priority goes to the one who registered later. Those who have been in the Community longer had more time to develop their team.
💡 Why are newcomers given priority?

Under equal conditions, the algorithm supports new members. This helps the Community grow and attract active people.
💡 Example: how the Priority Algorithm works

On the Tin Board, two Builders claim the Recipient position — MarinaSarah and Nikolay.Michael. Both are active, no blocks, with qualification.

Criterion 1 — partners on the Tin Board: MarinaSarah invited 3, NikolayMichael invited 3. Equal.

Criterion 2 — depth of participation (Starter Board): MarinaSarah has 5 partners on Starter, NikolayMichael has 4. MarinaSarah gets priority and becomes Recipient.

If there was equality here too — priority would go to the one who registered later (Criterion 3).

Board Placement Algorithm

When you enter a Board, the bot automatically searches for a positionplace for you using the following algorithm:

1 Mentor's Board
The bot searches for an active Board of the same gift amount from your direct inviter. Condition — the mentor must be active and have no blocks.
2 Duplicate check
If you were already on the mentor's Board on one side and it did nothasn't split after your exit — this Board is skipped. You go to the next higher mentor.
3 Compression
If it's impossible to get on the mentor's Board — the bot scans the mentor chain upward (up to 10,000 levels) and places you with the nearest active mentor who has a Board of the required gift amount and a free position.place.
4 Early Board
If no one was found within 10,000 levels (extremely unlikely) — you go to the earliest open Board of the Community of this gift amount.
ℹ️ What is "Compression"

Compression is an automatic search for a free positionplace up the mentor chain. It protects you from a situation when the mentor is inactive: the bot will find the nearest active mentor and place you on their Board.
💡 Duplicate protection rule

You cannot be on a Board where you have already been until it completely splits. This encourages mentors to be active, rather than hoping you will fill both sides of the Board with your efforts.
💡 Example: how Board placement works

OlgaJessica wants to enter the Tin Board. Her mentor is Pavel.James.

Step 1. The bot searches for Pavel'James's Tin Board. It exists, PavelJames is active, free positionsplaces available. ✅ OlgaJessica gets on Pavel'James's Board.

But RomanDavid has a different situation. His mentor is Svetlana,Emily, but she is in "Sleeping" status.

Step 1. Svetlana'Emily's Board is skipped (mentor inactive).
Step 3. Compression: the bot movesgoes up the chain. Svetlana'Emily's mentor is Timur.Robert. TimurRobert has a Tin Board, he is active, positionplace is free. ✅ RomanDavid gets on Timur'Robert's Board.
💡 Example: duplicate protection

UlyanaEmma was already on mentor Fyodor'John's Board on the left side — went from Giver to Recipient and exited. Now UlyanaEmma entersis entering the Tin Board again (re-entry throughvia Gift #8).

The bot checks: the left side of Fyodor'John's Board hasn't split after Ulyana'Emma's exitexit. has not yet split. This meansSo this Board is skipped — and UlyanaEmma goes to the Board of the next higher mentor.mentor's Board.

This rule motivates FyodorJohn to actively work with his Board, rather than counting on UlyanaEmma to fill both sides.

Placement Management

When you are a Recipient, you decide which side your personal partners enter the Board from.
The bot offers three distribution modes:

Mode Description When to use
Auto First partner to the left, second to the right, third to the left and so on. Even filling of both sides, starting from the left side top to bottom. Default mode. Suitable for most situations.
Left First all 4 positionsplaces on the left top to bottom, then the right side. If you need to split the left side faster.
Right First all 4 positionsplaces on the right top to bottom, then the left side. If you need to split the right side faster.
💡 Example: when to change placement mode

Want to become Recipient? You are Recipient on the Starter Board. On the left side there are already 3 Givers out of 4, and on the right — only 1.

You switch the mode to "Left". Your next invited partner will go to the left side — and it will fill. A split will occur, and you will receive the first 4 gifts.

After that you can switch the mode to "Right" — to fill the second side faster and receive the remaining gifts.

15-Minute Timer

After you take a Giver positionplace on the Board, a 15-minute timer starts. This is time to look around the Board and make a final decision.

Three possible scenarios:

1 Manual sending
You pressclick "Send gift". The gift instantly goes to the Recipient.
2 Auto-sending
You do nothing. After 15 minutes the smart contract automatically sends the gift to the Recipient.
3 ExitLeaving fromthe Board
You pressclick "Leave board". The gift returns to you from the smart contract (minus network fee), and you receive a temporary block.
⚠️ IMPORTANT:

Enter the Board only if you are ready to send a gift. ExitingLeaving the Board leadsresults toin a temporary account block (from 72 to 288 hours). More details on the "Rules and Safety" page.
💡 Example: what happens during 15 minutes

You entered the Starter Board and reserved 10 USDT. The timer started at 14:00.

Scenario A: At 14:03 you pressclick "Send gift" — the gift instantly goes to the Recipient. Done.

Scenario B: You do nothing. At 14:15 the smart contract automatically sends the gift. The result is the same — you became a Giver on the Board.

Scenario C: At 14:10 you changed your mind and pressedclicked "Leave board". 10 USDT returnsreturn (minus ~0.01 TON network fee), but your account is blocked for 72 hours.

Auto-confirmation of Gift

The Recipient does not need to confirm gift receipt of the gift manually. As soon as the smart contract transferred USDT from the Giver to the Recipient's wallet — the gift is considered automatically confirmed.

No waiting for manual confirmation.
Human factor and time zone differences eliminated.
The process is fully automated by blockchain and bot algorithm.
💡 Example: auto-confirmation in action

YuriJames is Recipient on the Starter Board. YanaSarah is a Giver who sent him a gift of 10 USDT.

YuriJames doesn't need to pressclick anything. The smart contract automatically transferred 9.5 USDT (minus 5% fee) to his wallet. The bot recorded: Gift #3 from YanaSarah received. YuriJames will see a notification in the bot.

YanaSarah also doesn't wait — she is already inat the Giver position, and her journey to the Recipient position begins immediately.

Why Invite Members

In the DP Smart Community there are no referral rewards and no marketing plan. You do not receive monetary bonuses for invitations — no percentages from gifts, no commissions, no multi-level accruals.

Invitations serve two functions:

📋 Board Filling

The more members on your side of the Board — the faster the split occurs and the faster you advance to the Recipient position.
🎯 Qualification

The number of your personal partners determines how many times you can become Recipient at each level (more details on the "Rules and Mechanics" page).
ℹ️ Invitations are a tool

Invitations are not a source of income. They are a tool for movement on the Gift Tracking Boards. That's why DP Smart is a Community of mutual gifts, not network marketing.
💡 Example: how invitations speed up advancement

Let's compare two members on the Starter Board:

AlexeyJames invited 4 people. All entered his side of the Board → split happened quickly → AlexeyJames is already a Builder in a few days. He also has qualification = 4, which will allow him to become Recipient up to 4 times at this level.

BorisRobert invited no one. Waiting for others to fill his side. The split is delayed. Qualification = 0 — even if he reaches the Creator position, he cannotwon't be able to become Recipient without qualification.

Invitations don't bring monetary bonuses, but directly affect speed and results.

🎯
Main Movement Principle
The more active you and your team are — the faster the split and your advancement. "My Board" is not just a button in the bot. It's a winner's strategy.

📖 What to read next

Algorithm: Rules and Mechanics — qualification, activity, "Sleeping" status, gift distribution and timers
Rules and Safety — blocks, account protection, recovery and Community terminology